As the coronavirus continues to spiral out across the globe, every government and even private organizations are now focusing on anything that can be used to save lives. One of the most in-demand devices is ventilator(s).
There is a massive demand for ventilators as health authorities from different corners of the globe scramble to buy these essential devices. The situation is so dire that even car manufacturers and other non-related entities have opted to chip in and manufacture the ventilators.
Other entities are opting to import ventilators from China to their respective countries.
What is a Ventilator?
A ventilator is a machine that gives mechanical ventilation by moving breathable air into and out of the lungs to convey breaths to a patient who is truly incapable of inhaling or having breathing difficulty.
Most ventilators re fully computerized and controlled by microprocessors. However, patients can still use simple hand-operated ventilators for minor breathing difficulties.
Ventilators are mainly used in intensive care medicine where a patient is at a critical stage. They are also a common feature in emergency medicine and anesthesiology.
Is this the same as a respirator? Although these two terms are always confused, they are very different. A respirator is basically a mask that prevents the wearer from inhaling toxic airborne particles. For example, health workers treating coronavirus patients must always wear N95 respirators.
Since the COVID-19 is such a deadly disease that directly affects the respiratory system, the presence of a ventilator can make the whole difference between life and death.
How Does it work in a Coronavirus Patient?
https://www.youtube.com/watch?v=gk_Qf-JAL84
As we have just mentioned, a ventilator is designed to assist a coronavirus patient breath well. Before a patient is placed on a ventilator, anesthetists will perform an intubation procedure. Once sedated, a tube is placed through the mouth of the patient and connected to the windpipe.
Although this is the standard procedure, maximum care is given when intubating the coronavirus patients. The health workers must be careful not to contract the disease. Such doctors are required to wear hazmat suits for protection.
The breathing tube is then connected to the ventilator and the medical staff can then control the rate at which the ventilator pumps oxygen into the lungs.
The ventilator pumps oxygen into the lungs while at the same time gets rid of the carbon dioxide from the body. A ventilator is always connected to a reliable power source since it depends on it to run.
Features to Look for When Buying Ventilators for Corona Virus
Portable ventilator
You have been assigned the task of buying ventilators that will be used for saving the lives of CODV-19 patients. What are some of the features that you should check out?
-The control modes
The best ventilators for the coronavirus should have at least modern control modes. The two most popular modes are SIMV and assist/ control modes.
For the pressure and volume controlled breaths, the ventilator has CRAP or PEEP controls.
The ventilator unit should be able to monitor the airway pressure and even the respiratory rate.
-Patient responsive modes
The best ventilator for the Corona Virus should have patient-responsive features. In addition to that, there should be patient-responsive modes or a combination of both features and modes.
For the high-end ventilators, there should be graphical dis[lay features that give loops and waveforms. The loops will be used for the comparisons with the trending data. It will be better if the ventilator provides the respiratory manoeuvers of the coronavirus patient.
-Alarm system
With the overwhelming numbers of the coronavirus patients, doctors and other health workers are not able to fully monitor the condition of a patient. This calls for the need for the ventilator alarm system.
The system should have both the visual and auditory alarms, which will be providing a timely alert regarding the status of the patient. Some of the data that the ventilator system can alert include the inspiratory pressure, CPAP?PEEP, respiratory rate, minute volume, power supply, and gas supply loss.
It will be good if the alarm volume can be adjusted. Also, the alarm should be able to reactivate within very few minutes if the conditions are not adjusted. Visual display features should be there to back up the audio signal.
-Defined control functions
The controls should be visible and easy to understand. By this, we are referring to the buttons, knobs, and switches. They should be easily identified by their functions.
The design of the control system should minimize misinterpretation and accidental settings. The ventilator should have a way in which such issues can be avoided.
The Cost of Medical Ventilator
Even in the time of crisis, such as now, we cannot avoid the issue of medical ventilator prices. As a health authority, the ventilator cost information will help you draw a proper budget.
The price of the medical ventilator will depend on its features. High-end ventilators are generally expected to attract a higher price as compared to the basic ventilators.
So, if you are after the most exquisite features on the ventilator, then you should be ready to part with the high price.
We cannot downplay the fact that the hospital ventilator manufacturer will also determine the price. Some are expensive, while others have reasonable prices.
Medical Ventilator Manufacturer in China- Senieer
Where to find affordable hospital ventilators for Corona Virus ( COVID19)? At this moment of crisis, the surest place is in China. There are many hospital ventilator manufacturers from whom you can buy.We at Senieer have built our name in supplying different types of ventilators. Our cluster of clients is spread across the globe and are fully satisfied with the quality of ventilators.We are guided by the international standards for the medical ventilators, and this ensures that our ventilators are of premium quality. Feel free to order for quality and affordable ventilators from us.